Temat: "Polymethyl Methacrylate" - OpacWWW

Skocz do pozycji: 1.

Tytuł:: Effects of body part thickness on low-contrast detail detection and radiation dose during adult chest radiography.
Autorzy:: Al-Murshedi S; College of Health and Medical Technology, AL-Zahraa University for Women, Karbala, Iraq.; Physics Department, College of Education for Pure Science, University of Babylon, Babil, Iraq.
Alzyoud K; Department of Medical Imaging, Faculty of Applied Health science, The Hashemite University, Zarqa, Jordan.
Benhalim M; Collage of Medical Technology Misurata, Misurata, Libya.
Alresheedi N; Department of General studies, Royal Commission for Jubail and Yanbu, Yanbu Industrial College, Yanbu, Kingdom of Saudi Arabia.
Papathanasiou S; City University of London, London, UK.
England A; School of Medicine, University College Cork, Cork, Ireland.; Pokaż więcej
Źródło:: Journal of medical radiation sciences [J Med Radiat Sci] 2024 Mar; Vol. 71 (1), pp. 85-90. Date of Electronic Publication: 2023 Dec 04.
Typ publikacji:: Journal Article
MeSH Terms:: Human Body*
Polymethyl Methacrylate*
Adult ; Humans ; Radiation Dosage ; Radiography ; Phantoms, Imaging

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 2.

Tytuł:: A simplified low-cost phantom for image quality assessment of dental cone beam computed tomography unit.
Autorzy:: Rabba JA; Advanced Medical and Dental Institute, Universiti Sains Malaysia, Penang, Malaysia.; Department of Physics, Federal University Lokoja, Lokoja, Nigeria.
Jaafar HA; Advanced Medical and Dental Institute, Universiti Sains Malaysia, Penang, Malaysia.
Suhaimi FM; Advanced Medical and Dental Institute, Universiti Sains Malaysia, Penang, Malaysia.
Jafri MZM; School of Physics, Universiti Sains Malaysia, Penang, Malaysia.
Osman ND; Advanced Medical and Dental Institute, Universiti Sains Malaysia, Penang, Malaysia.; Pokaż więcej
Źródło:: Journal of medical radiation sciences [J Med Radiat Sci] 2024 Mar; Vol. 71 (1), pp. 78-84. Date of Electronic Publication: 2023 Nov 15.
Typ publikacji:: Journal Article
MeSH Terms:: Cone-Beam Computed Tomography*/methods
Polymethyl Methacrylate*
Phantoms, Imaging ; Water ; Image Processing, Computer-Assisted/methods

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 3.

Tytuł:: Fabrication, structural, and enhanced mechanical behavior of MgO substituted PMMA composites for dental applications.
Autorzy:: Kumari S; Department of Physics, University of Lucknow, Lucknow, Uttar Pradesh, 226007, India.
Mishra RK; Department of Physics, University of Lucknow, Lucknow, Uttar Pradesh, 226007, India.
Parveen S; Department of Zoology, University of Lucknow, Lucknow, Uttar Pradesh, 226007, India.
Avinashi SK; Department of Physics, University of Lucknow, Lucknow, Uttar Pradesh, 226007, India.
Hussain A; Department of Physics, University of Lucknow, Lucknow, Uttar Pradesh, 226007, India.
Kumar S; Department of Zoology, University of Lucknow, Lucknow, Uttar Pradesh, 226007, India.
Banerjee M; Department of Zoology, University of Lucknow, Lucknow, Uttar Pradesh, 226007, India.
Rao J; Department of Prosthodontics, King George Medical University, Shah Mina Road, Chowk, Lucknow, Uttar Pradesh, 226003, India.
Kumar R; Department of Mechanical Engineering, Indian Institute of Technology, Banaras Hindu University, Varanasi, UP, 221005, India.
Gautam RK; Department of Mechanical Engineering, Indian Institute of Technology, Banaras Hindu University, Varanasi, UP, 221005, India.
Gautam C; Department of Physics, University of Lucknow, Lucknow, Uttar Pradesh, 226007, India. gautam_.; Pokaż więcej
Źródło:: Scientific reports [Sci Rep] 2024 Jan 25; Vol. 14 (1), pp. 2128. Date of Electronic Publication: 2024 Jan 25.
Typ publikacji:: Journal Article
MeSH Terms:: Polymethyl Methacrylate*
Magnesium Oxide*
Silicon Dioxide ; Spectroscopy, Fourier Transform Infrared ; Polymers ; Dental Materials

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 4.

Tytuł:: A Novel Semi-Cannulated Screw Enhanced Bone Cement Augmentation and Pullout Strength in Posterior Cervical Lateral Mass Screw Fixations: An In Vitro Biomechanical and Morphological Study.
Autorzy:: Canyang H; Division of Spine Surgery, Department of Orthopaedics, Nanfang Hospital, Southern Medical University, Guangzhou, China.; Division of Spine Surgery, Department of Orthopaedics, Quanzhou First Hospital Affiliated to Fujian Medical University and Quanzhou First Hospital Fujian, Quanzhou, China.
Weidong C; Division of Spine Surgery, Department of Orthopaedics, Nanfang Hospital, Southern Medical University, Guangzhou, China.
Zhiping H; Division of Spine Surgery, Department of Orthopaedics, Nanfang Hospital, Southern Medical University, Guangzhou, China.
Xiuhua W; Division of Spine Surgery, Department of Orthopaedics, Nanfang Hospital, Southern Medical University, Guangzhou, China.
Minghui Z; Division of Spine Surgery, Department of Orthopaedics, Nanfang Hospital, Southern Medical University, Guangzhou, China.; Department of Orthopaedics, Zengcheng Branch of Nanfang Hospital, Southern Medical University, Guangzhou, China.
Haihong H; Division of Spine Surgery, Department of Orthopaedics, Nanfang Hospital, Southern Medical University, Guangzhou, China.
Qingan Z; Division of Spine Surgery, Department of Orthopaedics, Nanfang Hospital, Southern Medical University, Guangzhou, China.
Dongbin Q; Division of Spine Surgery, Department of Orthopaedics, Nanfang Hospital, Southern Medical University, Guangzhou, China.; Department of Orthopaedics, Zengcheng Branch of Nanfang Hospital, Southern Medical University, Guangzhou, China.; Pokaż więcej
Źródło:: Orthopaedic surgery [Orthop Surg] 2023 Nov; Vol. 15 (11), pp. 2927-2936. Date of Electronic Publication: 2023 Sep 15.
Typ publikacji:: Journal Article
MeSH Terms:: Bone Cements*
Polymethyl Methacrylate*
Humans ; Bone Screws ; Bone Density ; Cervical Vertebrae/surgery ; Biomechanical Phenomena

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 5.

Tytuł:: Comparison of anterior column reconstruction techniques after en bloc spondylectomy: a finite element study.
Autorzy:: Pokorni AJ; In Silico Biomechanics Laboratory, National Center for Spinal Disorders, Királyhágó St. 1-3, Budapest, 1126, Hungary.; School of PhD Studies, Semmelweis University, Budapest, Hungary.
Turbucz M; In Silico Biomechanics Laboratory, National Center for Spinal Disorders, Királyhágó St. 1-3, Budapest, 1126, Hungary.; School of PhD Studies, Semmelweis University, Budapest, Hungary.
Kiss RM; Department of Mechatronics, Optics and Mechanical Engineering Informatics, Faculty of Mechanical Engineering, Budapest University of Technology and Economics, Műegyetem Rkp. 3., Budapest, 1111, Hungary.
Eltes PE; In Silico Biomechanics Laboratory, National Center for Spinal Disorders, Királyhágó St. 1-3, Budapest, 1126, Hungary. .; Department of Spine Surgery, Department of Orthopaedics, Semmelweis University, Budapest, Hungary. .
Lazary A; In Silico Biomechanics Laboratory, National Center for Spinal Disorders, Királyhágó St. 1-3, Budapest, 1126, Hungary.; Department of Spine Surgery, Department of Orthopaedics, Semmelweis University, Budapest, Hungary.; Pokaż więcej
Źródło:: Scientific reports [Sci Rep] 2023 Oct 31; Vol. 13 (1), pp. 18767. Date of Electronic Publication: 2023 Oct 31.
Typ publikacji:: Journal Article; Research Support, Non-U.S. Gov't
MeSH Terms:: Polymethyl Methacrylate*
Spinal Fusion*/methods
Humans ; Finite Element Analysis ; Lumbar Vertebrae/surgery ; Range of Motion, Articular ; Biomechanical Phenomena

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 6.

Tytuł:: Development of poly(methyl methacrylate)/poly(lactic acid) blend as sustainable biomaterial for dental applications.
Autorzy:: Charasseangpaisarn T; Dental Biomaterials Science, Graduate School, Chulalongkorn University, Bangkok, 10330, Thailand.; College of Dental Medicine, Rangsit University, Pathum Thani, 12000, Thailand.
Wiwatwarrapan C; Dental Biomaterials Science, Graduate School, Chulalongkorn University, Bangkok, 10330, Thailand.; Chula Unisearch, Chulalongkorn University, Bangkok, 10330, Thailand.
Thunyakitpisal P; Dental Biomaterials Science, Graduate School, Chulalongkorn University, Bangkok, 10330, Thailand.; Institute of Dentistry, Suranaree University of Technology, Nakhon Ratchasima, 30000, Thailand.
Srimaneepong V; Dental Biomaterials Science, Graduate School, Chulalongkorn University, Bangkok, 10330, Thailand. .; Department of Prosthodontics, Faculty of Dentistry, Chulalongkorn University, 34 Henri-Dunant Road, Wangmai, Patumwan, Bangkok, 10330, Thailand. .; Pokaż więcej
Źródło:: Scientific reports [Sci Rep] 2023 Oct 06; Vol. 13 (1), pp. 16904. Date of Electronic Publication: 2023 Oct 06.
Typ publikacji:: Journal Article; Research Support, Non-U.S. Gov't
MeSH Terms:: Polymethyl Methacrylate*
Biocompatible Materials*
Polyesters/metabolism ; Polymers ; Water

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 7.

Tytuł:: Modification of surface characteristics of ophthalmic biomaterial-polymethyl methacrylate induced by cobalt 60 gamma irradiation.
Autorzy:: Qin D; Ophthalmology Department, The Third People's Hospital of Chengdu, Chengdu, P R China.; Department of Ophthalmology, West China Hospital, Sichuan University, Chengdu, P R China.
Guo J; Ophthalmology Department, The Third People's Hospital of Chengdu, Chengdu, P R China.
Liang M; Ophthalmology Department, The Third People's Hospital of Chengdu, Chengdu, P R China.
Qin L; Ophthalmology Department, The Third People's Hospital of Chengdu, Chengdu, P R China.
Chen L; Ophthalmology Department, The Third People's Hospital of Chengdu, Chengdu, P R China.
He W; Department of Ophthalmology, West China Hospital, Sichuan University, Chengdu, P R China.; Pokaż więcej
Źródło:: PloS one [PLoS One] 2023 Sep 15; Vol. 18 (9), pp. e0291344. Date of Electronic Publication: 2023 Sep 15 (Print Publication: 2023).
Typ publikacji:: Journal Article; Research Support, Non-U.S. Gov't
MeSH Terms:: Polymethyl Methacrylate*
Cobalt Radioisotopes*
Biocompatible Materials ; Microscopy, Electron, Scanning

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 8.

Tytuł:: Custom-made 3D printing-based cranioplasty using a silicone mould and PMMA.
Autorzy:: Csámer L; Department of Orthopaedic Surgery, Faculty of Medicine, University of Debrecen, Debrecen, Hungary. .
Csernátony Z; Department of Orthopaedic Surgery, Faculty of Medicine, University of Debrecen, Debrecen, Hungary.
Novák L; Department of Neurosurgery, Faculty of Medicine, University of Debrecen, Debrecen, Hungary.
Kővári VZ; Department of Neurosurgery, Health Centre of Hungarian Army, Budapest, Hungary.
Kovács ÁÉ; Department of Orthopaedic Surgery, Faculty of Medicine, University of Debrecen, Debrecen, Hungary.
Soósné Horváth H; Department of Orthopaedic Surgery, Faculty of Medicine, University of Debrecen, Debrecen, Hungary.
Manó S; Department of Orthopaedic Surgery, Faculty of Medicine, University of Debrecen, Debrecen, Hungary.; Pokaż więcej
Źródło:: Scientific reports [Sci Rep] 2023 Jul 25; Vol. 13 (1), pp. 11985. Date of Electronic Publication: 2023 Jul 25.
Typ publikacji:: Journal Article; Research Support, Non-U.S. Gov't
MeSH Terms:: Polymethyl Methacrylate*
Plastic Surgery Procedures*
Humans ; Silicones ; Skull/surgery ; Prostheses and Implants ; Printing, Three-Dimensional

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 9.

Tytuł:: Effect of Molecular Weight on Phase Equilibrium in the Polystyrene-Poly(methyl methacrylate) System.
Autorzy:: Chalykh AE; Frumkin Institute of Physical Chemistry and Electrochemistry Russian Academy of Sciences (IPCE RAS), 31, Bld. 4 Leninsky Prospect, Moscow 119071, Russia.
Nikulova UV; Frumkin Institute of Physical Chemistry and Electrochemistry Russian Academy of Sciences (IPCE RAS), 31, Bld. 4 Leninsky Prospect, Moscow 119071, Russia.; Pokaż więcej
Źródło:: Molecules (Basel, Switzerland) [Molecules] 2023 Jul 07; Vol. 28 (13). Date of Electronic Publication: 2023 Jul 07.
Typ publikacji:: Journal Article
MeSH Terms:: Polystyrenes*/chemistry
Polymethyl Methacrylate*/chemistry
Molecular Weight ; Polymers/chemistry ; Thermodynamics

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 10.

Tytuł:: Thermodynamic Consideration of the Solid Saponin Extract Drop-Air System.
Autorzy:: Grzywaczyk A; Institute of Chemical Technology and Engineering, Poznań University of Technology, Berdychowo 4, 60-965 Poznań, Poland.
Smułek W; Institute of Chemical Technology and Engineering, Poznań University of Technology, Berdychowo 4, 60-965 Poznań, Poland.
Kaczorek E; Institute of Chemical Technology and Engineering, Poznań University of Technology, Berdychowo 4, 60-965 Poznań, Poland.
Zdziennicka A; Department of Interfacial Phenomena, Institute of Chemical Sciences, Faculty of Chemistry, Maria Curie-Skłodowska University in Lublin, Maria Curie-Skłodowska Sq. 3, 20-031 Lublin, Poland.
Jańczuk B; Department of Interfacial Phenomena, Institute of Chemical Sciences, Faculty of Chemistry, Maria Curie-Skłodowska University in Lublin, Maria Curie-Skłodowska Sq. 3, 20-031 Lublin, Poland.; Pokaż więcej
Źródło:: Molecules (Basel, Switzerland) [Molecules] 2023 Jun 23; Vol. 28 (13). Date of Electronic Publication: 2023 Jun 23.
Typ publikacji:: Journal Article
MeSH Terms:: Polymethyl Methacrylate*
Saponins*
Surface Properties ; Thermodynamics ; Water ; Polytetrafluoroethylene

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 11.

Tytuł:: Highly Luminescent Europium(III) Complexes in Solution and PMMA-Doped Films for Bright Red Electroluminescent Devices.
Autorzy:: Ahmed Z; Istituto per la Sintesi Organica e la Fotoreattività (ISOF), Consiglio Nazionale delle Ricerche (CNR), Via P. Gobetti 101, 40129 Bologna, Italy.
Carvalho RDS; Departamento de Física, Pontifícia Universidade Católica do Rio de Janeiro (PUC-Rio), Gávea, Rua Marques São Vicente 225, Rio de Janeiro 22451-900, Brazil.
Dos Santos AM; Departamento de Física, Pontifícia Universidade Católica do Rio de Janeiro (PUC-Rio), Gávea, Rua Marques São Vicente 225, Rio de Janeiro 22451-900, Brazil.
Gambassi F; Istituto per la Sintesi Organica e la Fotoreattività (ISOF), Consiglio Nazionale delle Ricerche (CNR), Via P. Gobetti 101, 40129 Bologna, Italy.
Bandini E; Istituto per la Sintesi Organica e la Fotoreattività (ISOF), Consiglio Nazionale delle Ricerche (CNR), Via P. Gobetti 101, 40129 Bologna, Italy.
Marvelli L; Dipartimento di Scienze Chimiche Farmaceutiche ed Agrarie, Università Degli Studi di Ferrara, Via Luigi Borsari 46, 44121 Ferrara, Italy.
Maini L; Dipartimento di Chimica 'Giacomo Ciamician', Università Degli Studi di Bologna, Via Selmi 2, 40126 Bologna, Italy.
Barbieri A; Istituto per la Sintesi Organica e la Fotoreattività (ISOF), Consiglio Nazionale delle Ricerche (CNR), Via P. Gobetti 101, 40129 Bologna, Italy.
Cremona M; Departamento de Física, Pontifícia Universidade Católica do Rio de Janeiro (PUC-Rio), Gávea, Rua Marques São Vicente 225, Rio de Janeiro 22451-900, Brazil.; Pokaż więcej
Źródło:: Molecules (Basel, Switzerland) [Molecules] 2023 May 26; Vol. 28 (11). Date of Electronic Publication: 2023 May 26.
Typ publikacji:: Journal Article
MeSH Terms:: Europium*/chemistry
Polymethyl Methacrylate*/chemistry
Luminescence ; Ketones/chemistry ; Ligands

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 12.

Tytuł:: A meta-analysis comparing the efficacy of mineralized collagen-polymethylmethacrylate and polymethylmethacrylate bone cements in the treatment of vertebral compression fractures.
Autorzy:: Li SF; Department of Orthopaedics, Heping Hospital Affiliated to Changzhi Medical College, Changzhi, P.R. China.; Graduate School, Changzhi Medical College, Changzhi, P.R. China.
Li XY; Department of Orthopaedics, Heping Hospital Affiliated to Changzhi Medical College, Changzhi, P.R. China.; Graduate School, Changzhi Medical College, Changzhi, P.R. China.
Bai XH; Department of Orthopaedics, Heping Hospital Affiliated to Changzhi Medical College, Changzhi, P.R. China.; Graduate School, Changzhi Medical College, Changzhi, P.R. China.
Wang YL; Department of Orthopaedics, Heping Hospital Affiliated to Changzhi Medical College, Changzhi, P.R. China.; Graduate School, Changzhi Medical College, Changzhi, P.R. China.
Han PF; Department of Orthopaedics, Heping Hospital Affiliated to Changzhi Medical College, Changzhi, P.R. China.
Li HZ; Department of Orthopaedics, Heping Hospital Affiliated to Changzhi Medical College, Changzhi, P.R. China.; Pokaż więcej
Źródło:: PloS one [PLoS One] 2024 Mar 08; Vol. 19 (3), pp. e0299325. Date of Electronic Publication: 2024 Mar 08 (Print Publication: 2024).
Typ publikacji:: Journal Article; Meta-Analysis
MeSH Terms:: Fractures, Compression*/surgery
Kyphoplasty*/methods
Osteoporotic Fractures*/surgery
Spinal Fractures*/surgery
Vertebroplasty*
Humans ; Bone Cements/therapeutic use ; Bone Cements/chemistry ; Collagen ; Pain/drug therapy ; Polymethyl Methacrylate/therapeutic use ; Polymethyl Methacrylate/chemistry ; Treatment Outcome

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 13.

Tytuł:: Integrated Experimental and Mathematical Exploration of Modular Tissue Cultures for Developmental Engineering.
Autorzy:: Sun T; Department of Chemical Engineering, Loughborough University, Epinal Way, Loughborough LE11 3TU, UK.
Xiang Y; Department of Materials, Loughborough University, Epinal Way, Loughborough LE11 3TU, UK.
Turner F; Department of Chemical Engineering, Loughborough University, Epinal Way, Loughborough LE11 3TU, UK.
Bao X; Department of Materials, Loughborough University, Epinal Way, Loughborough LE11 3TU, UK.; Pokaż więcej
Źródło:: International journal of molecular sciences [Int J Mol Sci] 2024 Mar 04; Vol. 25 (5). Date of Electronic Publication: 2024 Mar 04.
Typ publikacji:: Journal Article
MeSH Terms:: Tissue Scaffolds*/chemistry
Tissue Engineering*/methods
Humans ; Polymethyl Methacrylate/chemistry ; Polyesters ; Oxygen

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 14.

Tytuł:: Rapid prototyping of PMMA-based microfluidic spheroid-on-a-chip models using micromilling and vapour-assisted thermal bonding.
Autorzy:: Ahmed MAM; Pharmaceutical Analysis, Groningen Research Institute of Pharmacy, University of Groningen, Groningen, The Netherlands.
Jurczak KM; W.J. Kolff Institute for Biomedical Engineering and Materials Science, University Medical Center Groningen, Groningen, The Netherlands.; Department of Surgery, University Medical Center Groningen, Groningen, The Netherlands.
Lynn NS Jr; Institute of Physics, Czech Academy of Sciences, Prague, Czech Republic.
Mulder JSH; Pharmaceutical Analysis, Groningen Research Institute of Pharmacy, University of Groningen, Groningen, The Netherlands.
Verpoorte EMJ; Pharmaceutical Analysis, Groningen Research Institute of Pharmacy, University of Groningen, Groningen, The Netherlands.
Nagelkerke A; Pharmaceutical Analysis, Groningen Research Institute of Pharmacy, University of Groningen, Groningen, The Netherlands. .; Pokaż więcej
Źródło:: Scientific reports [Sci Rep] 2024 Feb 03; Vol. 14 (1), pp. 2831. Date of Electronic Publication: 2024 Feb 03.
Typ publikacji:: Journal Article
MeSH Terms:: Microfluidics*/methods
Microfluidic Analytical Techniques*
Polymethyl Methacrylate/chemistry ; Chloroform ; Lab-On-A-Chip Devices

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 15.

Tytuł:: Dental Material Selection for the Additive Manufacturing of Removable Complete Dentures (RCD).
Autorzy:: Grachev DI; Digital Dentistry Department, A.I. Yevdokimov Moscow State University of Medicine and Dentistry, 127473 Moscow, Russia.
Chizhmakov EA; Prosthodontics Technology Department, A.I. Yevdokimov Moscow State University of Medicine and Dentistry, 127473 Moscow, Russia.
Stepanov DY; Laboratory of Mechanics of Polymer Composite Materials, Institute of Strength Physics and Materials Science of Siberian Branch of Russian Academy of Sciences, 634055 Tomsk, Russia.
Buslovich DG; Laboratory of Nanobioengineering, Institute of Strength Physics and Materials Science of Siberian Branch of Russian Academy of Sciences, 634055 Tomsk, Russia.
Khulaev IV; Institute of Dentistry and Maxillofacial Surgery, Kabardino-Balkarian State University Named after H.M. Berbekov, 360004 Nalchik, Russia.
Deshev AV; Laboratory of Digital Dentistry, Kabardino-Balkarian State University Named after H.M. Berbekov, 360004 Nalchik, Russia.
Kirakosyan LG; Digital Dentistry Department, A.I. Yevdokimov Moscow State University of Medicine and Dentistry, 127473 Moscow, Russia.
Arutyunov AS; Prosthodontics Technology Department, A.I. Yevdokimov Moscow State University of Medicine and Dentistry, 127473 Moscow, Russia.
Kardanova SY; Institute of Dentistry and Maxillofacial Surgery, Kabardino-Balkarian State University Named after H.M. Berbekov, 360004 Nalchik, Russia.
Panin KS; Department of Chemical Physics, Institute for Laser and Plasma Technologies, National Research Nuclear University MEPhI, 115409 Moscow, Russia.
Panin SV; Laboratory of Mechanics of Polymer Composite Materials, Institute of Strength Physics and Materials Science of Siberian Branch of Russian Academy of Sciences, 634055 Tomsk, Russia.; Pokaż więcej
Źródło:: International journal of molecular sciences [Int J Mol Sci] 2023 Mar 29; Vol. 24 (7). Date of Electronic Publication: 2023 Mar 29.
Typ publikacji:: Journal Article
MeSH Terms:: Denture, Complete*
Polymethyl Methacrylate*
Prosthesis Design ; Technology ; Dental Materials ; Computer-Aided Design

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 16.

Tytuł:: Evaluation of Polymeric Particles for Modular Tissue Cultures in Developmental Engineering.
Autorzy:: Xiang Y; Department of Materials, Loughborough University, Epinal Way, Loughborough LE11 3TU, UK.
Yan J; Wolfson School of Mechanical, Electrical and Manufacturing Engineering, Loughborough University, Epinal Way, Loughborough LE11 3TU, UK.
Bao X; Department of Materials, Loughborough University, Epinal Way, Loughborough LE11 3TU, UK.
Gleadall A; Wolfson School of Mechanical, Electrical and Manufacturing Engineering, Loughborough University, Epinal Way, Loughborough LE11 3TU, UK.
Roach P; Department of Chemistry, Loughborough University, Epinal Way, Loughborough LE11 3TU, UK.
Sun T; Department of Chemical Engineering, Loughborough University, Epinal Way, Loughborough LE11 3TU, UK.; Pokaż więcej
Źródło:: International journal of molecular sciences [Int J Mol Sci] 2023 Mar 09; Vol. 24 (6). Date of Electronic Publication: 2023 Mar 09.
Typ publikacji:: Journal Article
MeSH Terms:: Polymers*
Polymethyl Methacrylate*
Humans ; Cell Culture Techniques ; Polyesters ; Tissue Engineering ; Tissue Scaffolds

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 17.

Tytuł:: Microencapsulation of n-tetradecane with poly (methyl methacrylate-co-methacrylic acid) shell by seeded emulsion polymerisation and its thermal energy storage characteristics.
Autorzy:: Mahajan UR; Department of Polymer and Surface Engineering, Institute of Chemical Technology, Mumbai, India.
Emmanuel I; Covestro India Pvt. Ltd., Mumbai, India.
Shrinivasa Rao A; Covestro India Pvt. Ltd., Mumbai, India.
Mhaske ST; Department of Polymer and Surface Engineering, Institute of Chemical Technology, Mumbai, India.; Pokaż więcej
Źródło:: Journal of microencapsulation [J Microencapsul] 2023 Mar; Vol. 40 (2), pp. 98-105. Date of Electronic Publication: 2023 Feb 14.
Typ publikacji:: Journal Article
MeSH Terms:: Hot Temperature*
Polymethyl Methacrylate*
Emulsions/chemistry ; Capsules/chemistry ; Methacrylates

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 18.

Tytuł:: The choice of an autocorrelation length in dark-field lung imaging.
Autorzy:: Spindler S; Swiss Light Source, Paul Scherrer Institute, 5232, Villigen, Switzerland. .; Institute for Biomedical Engineering, ETH Zürich, 8092, Zürich, Switzerland. .
Etter D; Swiss Light Source, Paul Scherrer Institute, 5232, Villigen, Switzerland.; Institute for Biomedical Engineering, ETH Zürich, 8092, Zürich, Switzerland.
Rawlik M; Swiss Light Source, Paul Scherrer Institute, 5232, Villigen, Switzerland.; Institute for Biomedical Engineering, ETH Zürich, 8092, Zürich, Switzerland.
Polikarpov M; Swiss Light Source, Paul Scherrer Institute, 5232, Villigen, Switzerland.; Institute for Biomedical Engineering, ETH Zürich, 8092, Zürich, Switzerland.
Romano L; Swiss Light Source, Paul Scherrer Institute, 5232, Villigen, Switzerland.; Institute for Biomedical Engineering, ETH Zürich, 8092, Zürich, Switzerland.
Shi Z; Swiss Light Source, Paul Scherrer Institute, 5232, Villigen, Switzerland.; Institute for Biomedical Engineering, ETH Zürich, 8092, Zürich, Switzerland.
Jefimovs K; Swiss Light Source, Paul Scherrer Institute, 5232, Villigen, Switzerland.
Wang Z; Institute for Biomedical Engineering, ETH Zürich, 8092, Zürich, Switzerland.; Department of Engineering Physics, Tsinghua University, Haidian District, 100080, Beijing, China.; Key Laboratory of Particle & Radiation Imaging, (Tsinghua University) Ministry of Education, Haidian District, 100080, Beijing, China.
Stampanoni M; Swiss Light Source, Paul Scherrer Institute, 5232, Villigen, Switzerland.; Institute for Biomedical Engineering, ETH Zürich, 8092, Zürich, Switzerland.; Pokaż więcej
Źródło:: Scientific reports [Sci Rep] 2023 Feb 15; Vol. 13 (1), pp. 2731. Date of Electronic Publication: 2023 Feb 15.
Typ publikacji:: Journal Article; Research Support, Non-U.S. Gov't
MeSH Terms:: Polymethyl Methacrylate*
Lung*/diagnostic imaging
Animals ; Swine ; Radiography ; X-Rays

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 19.

Tytuł:: Antibiofilm properties of silver nanoparticles incorporated into polymethyl methacrylate used for dental applications.
Autorzy:: Ortiz-Magdaleno M; Basic Science Laboratory, Faculty of Stomatology, San Luis Potosí University, San Luis Potosi, Mexico.
Sánchez-Vargas L; Biochemical and Microbiology Laboratory, Faculty of Stomatology, San Luis Potosí University, San Luis Potosi, Mexico.
Gardea-Contreras D; Paediatric Dentistry Postgraduate Program, Faculty of Stomatology, San Luis Potosí University, San Luis Potosi, Mexico.
Campos-Ibarra V; Faculty of Stomatology, San Luis Potosí University, San Luis Potosi, Mexico.
Pozos-Guillén A; Basic Science Laboratory, Faculty of Stomatology, San Luis Potosí University, San Luis Potosi, Mexico.
Márquez-Preciado R; Paediatric Dentistry Postgraduate Program, Faculty of Stomatology, San Luis Potosí University, San Luis Potosi, Mexico.; Pokaż więcej
Źródło:: Bio-medical materials and engineering [Biomed Mater Eng] 2023; Vol. 34 (4), pp. 357-373.
Typ publikacji:: Journal Article
MeSH Terms:: Polymethyl Methacrylate*
Metal Nanoparticles*/therapeutic use
Silver/pharmacology ; Staphylococcus aureus ; Biofilms ; Anti-Bacterial Agents/pharmacology ; Microbial Sensitivity Tests

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 20.

Tytuł:: Antibacterial and Physical Properties of PVM/MA Copolymer- Incorporated Polymethyl Methacrylate as a Novel Antimicrobial Acrylic Resin Material.
Autorzy:: Lai C; Penn Dental Medicine, University of Pennsylvania, Philadelphia, PA 19104, USA.
Nguyen A; Penn Dental Medicine, University of Pennsylvania, Philadelphia, PA 19104, USA.
Ye L; College of Arts and Sciences, University of Pennsylvania, Philadelphia, PA 19104, USA.
Hao J; Penn Dental Medicine, University of Pennsylvania, Philadelphia, PA 19104, USA.
Koo H; Department of Orthodontics and Divisions of Pediatric Dentistry and Community Oral Health, Penn Dental Medicine, University of Pennsylvania, Philadelphia, PA 19104, USA.
Mante F; Department of Restorative Dentistry, Penn Dental Medicine, University of Pennsylvania, Philadelphia, PA 19104, USA.
Ozer F; Department of Restorative Dentistry, Penn Dental Medicine, University of Pennsylvania, Philadelphia, PA 19104, USA.; Pokaż więcej
Źródło:: Molecules (Basel, Switzerland) [Molecules] 2022 Dec 13; Vol. 27 (24). Date of Electronic Publication: 2022 Dec 13.
Typ publikacji:: Journal Article
MeSH Terms:: Polymethyl Methacrylate*
Anti-Infective Agents*
Acrylic Resins ; Surface Properties ; Anti-Bacterial Agents/pharmacology ; Water ; Materials Testing

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Informacja

Wyszukujesz frazę ""Polymethyl Methacrylate"" wg kryterium: Temat

Źródło danych

Ogranicz do:

Ogranicz do bazy

Typ dokumentu

Temat

Wydawca

Publikacja

Język