Temat: "Printing, Three-Dimensional" - OpacWWW

Skocz do pozycji: 1.

Tytuł:: Topology optimization on metamaterial cells for replacement possibility in non-pneumatic tire and the capability of 3D-printing.
Autorzy:: Dezianian S; Faculty of Mechanical Engineering, Semnan University, Semnan, Iran.
Azadi M; Faculty of Mechanical Engineering, Semnan University, Semnan, Iran.
Razavi SMJ; Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology, Trondheim, Norway.; Pokaż więcej
Źródło:: PloS one [PLoS One] 2023 Oct 13; Vol. 18 (10), pp. e0290345. Date of Electronic Publication: 2023 Oct 13 (Print Publication: 2023).
Typ publikacji:: Journal Article
MeSH Terms:: Printing, Three-Dimensional*
Materials Testing

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 2.

Tytuł:: Evaluation of stress-controlled high-cycle fatigue characteristics in PLA-wood fused deposition modeling 3D-printed parts under bending loads.
Autorzy:: Kianifar M; Faculty of Mechanical Engineering, Semnan University, Semnan, Iran.
Azadi M; Faculty of Mechanical Engineering, Semnan University, Semnan, Iran.
Heidari F; Department of Materials Engineering, Yasouj University, Yasouj, Iran.; Pokaż więcej
Źródło:: PloS one [PLoS One] 2024 Apr 18; Vol. 19 (4), pp. e0300569. Date of Electronic Publication: 2024 Apr 18 (Print Publication: 2024).
Typ publikacji:: Journal Article
MeSH Terms:: Wood*
Fractures, Stress*
Commerce ; Polyesters ; Printing, Three-Dimensional

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 3.

Tytuł:: Marginal fit of 3-unit implant-supported fixed partial dentures: Influence of pattern fabrication method and repeated porcelain firings.
Autorzy:: Giti R; Oral and Dental Diseases Research Center, Faculty of Dentistry, Shiraz University of Medical Sciences, Shiraz, Fars, Iran.; Department of Prosthodontics, Faculty of Dentistry, Shiraz University of Medical Sciences, Shiraz, Fars, Iran.
Farrahi P; Student Research Committee, Faculty of Dentistry, Shiraz University of Medical Sciences, Shiraz, Fars, Iran.; Pokaż więcej
Źródło:: PloS one [PLoS One] 2024 Apr 16; Vol. 19 (4), pp. e0301799. Date of Electronic Publication: 2024 Apr 16 (Print Publication: 2024).
Typ publikacji:: Journal Article
MeSH Terms:: Dental Porcelain*
Computer-Aided Design*
Printing, Three-Dimensional ; Denture, Partial, Fixed ; Metal Ceramic Alloys ; Dental Prosthesis Design ; Crowns

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 4.

Tytuł:: Development of a 3D simulator for training the mouse in utero electroporation.
Autorzy:: Nuber M; Translational Animal Research Center, University Medical Center of the Johannes Gutenberg-University, Mainz, Germany.
Gonzalez-Uarquin F; Translational Animal Research Center, University Medical Center of the Johannes Gutenberg-University, Mainz, Germany.
Neufurth M; Institute of Physiological Chemistry, University Medical Center of the Johannes Gutenberg-University, Mainz, Germany.
Brockmann MA; Department of Neuroradiology, University Medical Center of the Johannes Gutenberg-University, Mainz, Germany.
Baumgart J; Translational Animal Research Center, University Medical Center of the Johannes Gutenberg-University, Mainz, Germany.
Baumgart N; Translational Animal Research Center, University Medical Center of the Johannes Gutenberg-University, Mainz, Germany.; Pokaż więcej
Źródło:: PloS one [PLoS One] 2022 Dec 14; Vol. 17 (12), pp. e0279004. Date of Electronic Publication: 2022 Dec 14 (Print Publication: 2022).
Typ publikacji:: Journal Article; Research Support, Non-U.S. Gov't
MeSH Terms:: Electroporation*/methods
Printing, Three-Dimensional*
Female ; Mice ; Animals ; Embryo, Mammalian ; Tomography, X-Ray Computed ; Pelvis

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 5.

Tytuł:: Cost-effective micro-CT system for non-destructive testing of titanium 3D printed medical components.
Autorzy:: Cobos SF; Department of Medical Biophysics, Schulich School of Medicine & Dentistry, The University of Western Ontario, London, Ontario, Canada.
Norley CJ; Imaging Research Laboratories, Robarts Research Institute, The University of Western Ontario, London, Ontario, Canada.
Pollmann SI; Imaging Research Laboratories, Robarts Research Institute, The University of Western Ontario, London, Ontario, Canada.
Holdsworth DW; Department of Medical Biophysics, Schulich School of Medicine & Dentistry, The University of Western Ontario, London, Ontario, Canada.; Imaging Research Laboratories, Robarts Research Institute, The University of Western Ontario, London, Ontario, Canada.; Pokaż więcej
Źródło:: PloS one [PLoS One] 2022 Oct 10; Vol. 17 (10), pp. e0275732. Date of Electronic Publication: 2022 Oct 10 (Print Publication: 2022).
Typ publikacji:: Journal Article; Research Support, Non-U.S. Gov't
MeSH Terms:: Printing, Three-Dimensional*
Titanium*
Cost-Benefit Analysis ; Phantoms, Imaging ; Powders ; X-Ray Microtomography

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 6.

Tytuł:: Open source surgical fracture table for digitally distributed manufacturing.
Autorzy:: Bow JK; Department of Materials Science & Engineering, Michigan Technological University, Houghton, MI, United States of America.
Gallup N; Department of Biomedical Engineering and Mechanical Engineering, Michigan Technological University, Houghton, MI, United States of America.
Sadat SA; Department of Electrical & Computer Engineering and Ivey School of Business, Western University, London, ON, Canada.
Pearce JM; Department of Materials Science & Engineering, Michigan Technological University, Houghton, MI, United States of America.; Department of Electrical & Computer Engineering and Ivey School of Business, Western University, London, ON, Canada.; Pokaż więcej
Źródło:: PloS one [PLoS One] 2022 Jul 15; Vol. 17 (7), pp. e0270328. Date of Electronic Publication: 2022 Jul 15 (Print Publication: 2022).
Typ publikacji:: Journal Article
MeSH Terms:: Printing, Three-Dimensional*
Equipment Design ; Humans

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 7.

Tytuł:: Mod3D: A low-cost, flexible modular system of live-cell microscopy chambers and holders.
Autorzy:: Goss S; Department of Biochemistry and Biomedical Sciences, McMaster University, Hamilton, Ontario, Canada.
Barba Bazan C; Department of Biochemistry and Biomedical Sciences, McMaster University, Hamilton, Ontario, Canada.
Neuman K; Department of Biochemistry and Biomedical Sciences, McMaster University, Hamilton, Ontario, Canada.
Peng C; Department of Biochemistry and Biomedical Sciences, McMaster University, Hamilton, Ontario, Canada.
Begeja N; Department of Biochemistry and Biomedical Sciences, McMaster University, Hamilton, Ontario, Canada.
Suart CE; Department of Biochemistry and Biomedical Sciences, McMaster University, Hamilton, Ontario, Canada.
Truant R; Department of Biochemistry and Biomedical Sciences, McMaster University, Hamilton, Ontario, Canada.; Center for Advanced Light Microscopy (CALM), McMaster University, Hamilton, Ontario, Canada.; Pokaż więcej
Źródło:: PloS one [PLoS One] 2022 Jun 03; Vol. 17 (6), pp. e0269345. Date of Electronic Publication: 2022 Jun 03 (Print Publication: 2022).
Typ publikacji:: Journal Article; Research Support, Non-U.S. Gov't
MeSH Terms:: Microscopy*
Printing, Three-Dimensional*
Plastics ; Printing ; Reproducibility of Results

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 8.

Tytuł:: Utilization of solid mine waste in the building materials for 3D printing.
Autorzy:: Zhang X; School of Low-Carbon Energy and Power Engineering, China University of Mining and Technology, Xuzhou, China.; Jiaozuo Qianye New Materials Company, Jiaozuo, China.
Guo C; School of Low-Carbon Energy and Power Engineering, China University of Mining and Technology, Xuzhou, China.
Ma J; School of Civil Engineering, Henan Polytechnic University, Jiaozuo, China.
Jiao H; School of Civil Engineering, Henan Polytechnic University, Jiaozuo, China.
Kim M; School of Civil, Environmental and Architectural Engineering, Korea University, Seongbuk-gu, Seoul, Republic of Korea.; Pokaż więcej
Źródło:: PloS one [PLoS One] 2023 Oct 19; Vol. 18 (10), pp. e0292951. Date of Electronic Publication: 2023 Oct 19 (Print Publication: 2023).
Typ publikacji:: Journal Article; Research Support, Non-U.S. Gov't
MeSH Terms:: Sand*
Construction Materials*
Powders ; Printing, Three-Dimensional ; Calcium Carbonate

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 9.

Tytuł:: Microbial adhesion and biofilm formation by Candida albicans on 3D-printed denture base resins.
Autorzy:: Silva MDDD; Department of Dental Materials and Prosthodontics, Araraquara School of Dentistry, São Paulo State University (UNESP), Araraquara, SP, Brazil.
Nunes TSBS; Department of Dental Materials and Prosthodontics, Araraquara School of Dentistry, São Paulo State University (UNESP), Araraquara, SP, Brazil.
Viotto HEDC; Department of Dental Materials and Prosthodontics, Araraquara School of Dentistry, São Paulo State University (UNESP), Araraquara, SP, Brazil.
Coelho SRG; Department of Dental Materials and Prosthodontics, Araraquara School of Dentistry, São Paulo State University (UNESP), Araraquara, SP, Brazil.
Souza RF; Faculty of Dental Medicine and Oral Health Sciences, McGill University, Montreal, QC, Canada.
Pero AC; Department of Dental Materials and Prosthodontics, Araraquara School of Dentistry, São Paulo State University (UNESP), Araraquara, SP, Brazil.; Pokaż więcej
Źródło:: PloS one [PLoS One] 2023 Oct 04; Vol. 18 (10), pp. e0292430. Date of Electronic Publication: 2023 Oct 04 (Print Publication: 2023).
Typ publikacji:: Journal Article; Research Support, Non-U.S. Gov't
MeSH Terms:: Candida albicans*
Denture Bases*/microbiology
Biofilms ; Surface Properties ; Printing, Three-Dimensional ; Materials Testing ; Polymethyl Methacrylate

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 10.

Tytuł:: A 3D printed electronic wearable device to generate vertical, horizontal and phono-articulatory jaw movement parameters: A concept implementation.
Autorzy:: Farook TH; Adelaide Dental School, University of Adelaide, Adelaide, SA, Australia.
Ahmed S; Department of Electrical and Computer Engineering, North South University, Dhaka, Bangladesh.
Talukder MSI; Department of Electrical and Computer Engineering, North South University, Dhaka, Bangladesh.
Dudley J; Adelaide Dental School, University of Adelaide, Adelaide, SA, Australia.; Pokaż więcej
Źródło:: PloS one [PLoS One] 2023 Sep 13; Vol. 18 (9), pp. e0290497. Date of Electronic Publication: 2023 Sep 13 (Print Publication: 2023).
Typ publikacji:: Journal Article; Research Support, Non-U.S. Gov't
MeSH Terms:: Movement*
Wearable Electronic Devices*
Humans ; Motion ; Electronics ; Printing, Three-Dimensional

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 11.

Tytuł:: Osseointegrability of 3D-printed porous titanium alloy implant on tibial shaft bone defect in rabbit model.
Autorzy:: Phuoc HD; Department of Orthopaedics and Rehabilitation, University of Medicine and Pharmacy at Ho Chi Minh City, Ho Chi Minh City, Vietnam.; Department of Orthopaedics and Traumatology, Cho Ray Hospital, Ho Chi Minh City, Vietnam.
Hoang PN; Department of Orthopaedics and Rehabilitation, University of Medicine and Pharmacy at Ho Chi Minh City, Ho Chi Minh City, Vietnam.; Department of Orthopaedics and Traumatology, Cho Ray Hospital, Ho Chi Minh City, Vietnam.
Yang S; Manufacturing, Commonwealth Scientific and Industrial Research Organisation, Clayton, Victoria, Australia.
Fraser D; Manufacturing, Commonwealth Scientific and Industrial Research Organisation, Clayton, Victoria, Australia.
Nguyen VT; Manufacturing, Commonwealth Scientific and Industrial Research Organisation, Clayton, Victoria, Australia.; Pokaż więcej
Źródło:: PloS one [PLoS One] 2023 Sep 08; Vol. 18 (9), pp. e0282457. Date of Electronic Publication: 2023 Sep 08 (Print Publication: 2023).
Typ publikacji:: Journal Article
MeSH Terms:: Diaphyses*
Lagomorpha*
Animals ; Rabbits ; Porosity ; Titanium ; X-Ray Microtomography ; Alloys ; Printing, Three-Dimensional

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 12.

Tytuł:: The fracture resistance of 3D-printed versus milled provisional crowns: An in vitro study.
Autorzy:: Othman A; Research Center for Digital Technologies in Dentistry and CAD/CAM, Department of Dentistry, Faculty of Medicine and Dentistry, Danube Private University, Krems, Austria.
Sandmair M; Research Center for Digital Technologies in Dentistry and CAD/CAM, Department of Dentistry, Faculty of Medicine and Dentistry, Danube Private University, Krems, Austria.
Alevizakos V; Research Center for Digital Technologies in Dentistry and CAD/CAM, Department of Dentistry, Faculty of Medicine and Dentistry, Danube Private University, Krems, Austria.
von See C; Research Center for Digital Technologies in Dentistry and CAD/CAM, Department of Dentistry, Faculty of Medicine and Dentistry, Danube Private University, Krems, Austria.; Pokaż więcej
Źródło:: PloS one [PLoS One] 2023 Sep 01; Vol. 18 (9), pp. e0285760. Date of Electronic Publication: 2023 Sep 01 (Print Publication: 2023).
Typ publikacji:: Journal Article
MeSH Terms:: Molar*
Fractures, Bone*
Humans ; Incisor ; Research Design ; Cuspid ; Printing, Three-Dimensional

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 13.

Tytuł:: Polishing of metal 3D printed parts with complex geometry: Visualizing the influence on geometrical features using centrifugal disk finishing.
Autorzy:: Lussenburg K; Bio-Inspired Technology Group (BITE), Department BioMechanical Engineering, Faculty of Mechanical, Maritime, and Materials Engineering, Delft University of Technology, Delft, The Netherlands.
van Starkenburg R; Department of Electronic and Mechanical Support Division (DEMO), Delft University of Technology, Delft, The Netherlands.
Bruins M; Bio-Inspired Technology Group (BITE), Department BioMechanical Engineering, Faculty of Mechanical, Maritime, and Materials Engineering, Delft University of Technology, Delft, The Netherlands.
Sakes A; Bio-Inspired Technology Group (BITE), Department BioMechanical Engineering, Faculty of Mechanical, Maritime, and Materials Engineering, Delft University of Technology, Delft, The Netherlands.
Breedveld P; Bio-Inspired Technology Group (BITE), Department BioMechanical Engineering, Faculty of Mechanical, Maritime, and Materials Engineering, Delft University of Technology, Delft, The Netherlands.; Pokaż więcej
Źródło:: PloS one [PLoS One] 2023 Aug 15; Vol. 18 (8), pp. e0289730. Date of Electronic Publication: 2023 Aug 15 (Print Publication: 2023).
Typ publikacji:: Journal Article; Research Support, Non-U.S. Gov't
MeSH Terms:: Light*
Metals*
Surface Properties ; Materials Testing ; Printing, Three-Dimensional ; Dental Polishing

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 14.

Tytuł:: A platform of assays for the discovery of anti-Zika small-molecules with activity in a 3D-bioprinted outer-blood-retina model.
Autorzy:: Dorjsuren D; Division of Preclinical Innovation, National Center for Advancing Translational Sciences, National Institutes of Health, Rockville, Maryland, United States of America.
Eastman RT; Division of Preclinical Innovation, National Center for Advancing Translational Sciences, National Institutes of Health, Rockville, Maryland, United States of America.
Song MJ; Division of Preclinical Innovation, National Center for Advancing Translational Sciences, National Institutes of Health, Rockville, Maryland, United States of America.
Yasgar A; Division of Preclinical Innovation, National Center for Advancing Translational Sciences, National Institutes of Health, Rockville, Maryland, United States of America.
Chen Y; Division of Preclinical Innovation, National Center for Advancing Translational Sciences, National Institutes of Health, Rockville, Maryland, United States of America.
Bharti K; Unit on Ocular and Stem Cell Translational Research, National Eye Institute, National Institutes of Health, Bethesda, Maryland, United States of America.
Zakharov AV; Division of Preclinical Innovation, National Center for Advancing Translational Sciences, National Institutes of Health, Rockville, Maryland, United States of America.
Jadhav A; Division of Preclinical Innovation, National Center for Advancing Translational Sciences, National Institutes of Health, Rockville, Maryland, United States of America.
Ferrer M; Division of Preclinical Innovation, National Center for Advancing Translational Sciences, National Institutes of Health, Rockville, Maryland, United States of America.
Shi PY; University of Texas Medical Branch Galveston, Galveston, TX, United States of America.
Simeonov A; Division of Preclinical Innovation, National Center for Advancing Translational Sciences, National Institutes of Health, Rockville, Maryland, United States of America.; Pokaż więcej
Źródło:: PloS one [PLoS One] 2022 Jan 18; Vol. 17 (1), pp. e0261821. Date of Electronic Publication: 2022 Jan 18 (Print Publication: 2022).
Typ publikacji:: Journal Article
MeSH Terms:: Models, Biological*
Printing, Three-Dimensional*
Retina*/metabolism
Retina*/virology
Zika Virus Infection*/drug therapy
Zika Virus Infection*/genetics
Zika Virus Infection*/metabolism
Antiviral Agents/*pharmacology
Virus Replication/*drug effects
Zika Virus/*physiology
Animals ; Antiviral Agents/chemistry ; Chlorocebus aethiops ; Drug Evaluation, Preclinical ; Hep G2 Cells ; Humans ; Vero Cells ; Virus Replication/genetics

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 15.

Tytuł:: 3D-printed external cranial protection following decompressive craniectomy after brain injury: A pilot feasibility cohort study.
Autorzy:: Chua KSG; Tan Tock Seng Rehabilitation Centre, Tan Tock Seng Hospital, Singapore, Singapore.
Krishnan RR; Tan Tock Seng Rehabilitation Centre, Tan Tock Seng Hospital, Singapore, Singapore.
Yen JM; Tan Tock Seng Rehabilitation Centre, Tan Tock Seng Hospital, Singapore, Singapore.
Plunkett TK; Tan Tock Seng Rehabilitation Centre, Tan Tock Seng Hospital, Singapore, Singapore.
Soh YM; Tan Tock Seng Rehabilitation Centre, Tan Tock Seng Hospital, Singapore, Singapore.
Lim CJ; Clinical Research and Innovation Office, Tan Tock Seng Hospital, Singapore, Singapore.
Chia CM; AuMed Pte Ltd, Singapore, Singapore.
Looi JC; AuMed Pte Ltd, Singapore, Singapore.
Ng SG; Department of Neurosurgery, National Neuroscience Institute, TTSH Campus, Singapore, Singapore.
Rao J; Department of Neurosurgery, National Neuroscience Institute, TTSH Campus, Singapore, Singapore.; Pokaż więcej
Źródło:: PloS one [PLoS One] 2021 Oct 28; Vol. 16 (10), pp. e0258296. Date of Electronic Publication: 2021 Oct 28 (Print Publication: 2021).
Typ publikacji:: Journal Article; Research Support, Non-U.S. Gov't
MeSH Terms:: Decompressive Craniectomy*/adverse effects
Printing, Three-Dimensional*
Brain Injuries/*surgery
Skull/*surgery
Adult ; Aged ; Brain Injuries/physiopathology ; Brain Injuries/rehabilitation ; Cognition ; Cohort Studies ; Feasibility Studies ; Female ; Head Protective Devices ; Humans ; Male ; Middle Aged ; Motor Activity ; Outcome Assessment, Health Care ; Pilot Projects ; Skull/physiopathology

Czasopismo naukowe

na półce

Pełny tekst Szczegóły

Skocz do pozycji: 16.

Tytuł:: Comparison of the internal fit of metal crowns fabricated by traditional casting, computer numerical control milling, and three-dimensional printing.
Autorzy:: Chou WT; Division of Prosthodontics, Tri-Service General Hospital, Taipei, Taiwan, R.O.C.; School of Dentistry, National Defense Medical Center, Taipei, Taiwan, R.O.C.
Chuang CC; Division of Prosthodontics, Tri-Service General Hospital, Taipei, Taiwan, R.O.C.; School of Dentistry, National Defense Medical Center, Taipei, Taiwan, R.O.C.
Wang YB; Division of Prosthodontics, Tri-Service General Hospital, Taipei, Taiwan, R.O.C.
Chiu HC; Division of Prosthodontics, Tri-Service General Hospital, Taipei, Taiwan, R.O.C.; School of Dentistry, National Defense Medical Center, Taipei, Taiwan, R.O.C.; Pokaż więcej
Źródło:: PloS one [PLoS One] 2021 Sep 16; Vol. 16 (9), pp. e0257158. Date of Electronic Publication: 2021 Sep 16 (Print Publication: 2021).
Typ publikacji:: Comparative Study; Journal Article
MeSH Terms:: Computer-Aided Design*
Crowns*
Dental Casting Technique*
Dental Prosthesis Design*
Printing, Three-Dimensional*
Silicones/chemistry

Czasopismo naukowe

na półce

Pełny tekst Szczegóły

Skocz do pozycji: 17.

Tytuł:: Investigation into relationships between design parameters and mechanical properties of 3D printed PCL/nHAp bone scaffolds.
Autorzy:: Yazdanpanah Z; Division of Biomedical Engineering, College of Engineering, University of Saskatchewan, Saskatoon, Saskatchewan, Canada.
Kumar Sharma N; Department of Mechanical Engineering, College of Engineering, University of Saskatchewan, Saskatoon, Saskatchewan, Canada.
Zimmerling A; Division of Biomedical Engineering, College of Engineering, University of Saskatchewan, Saskatoon, Saskatchewan, Canada.
Cooper DML; Department of Anatomy Physiology and Pharmacology, College of Medicine, University of Saskatchewan, Saskatoon, Saskatchewan, Canada.
Johnston JD; Division of Biomedical Engineering, College of Engineering, University of Saskatchewan, Saskatoon, Saskatchewan, Canada.; Department of Mechanical Engineering, College of Engineering, University of Saskatchewan, Saskatoon, Saskatchewan, Canada.
Chen X; Division of Biomedical Engineering, College of Engineering, University of Saskatchewan, Saskatoon, Saskatchewan, Canada.; Department of Mechanical Engineering, College of Engineering, University of Saskatchewan, Saskatoon, Saskatchewan, Canada.; Pokaż więcej
Źródło:: PloS one [PLoS One] 2023 Jul 14; Vol. 18 (7), pp. e0288531. Date of Electronic Publication: 2023 Jul 14 (Print Publication: 2023).
Typ publikacji:: Journal Article
MeSH Terms:: Durapatite*/chemistry
Tissue Scaffolds*/chemistry
Tissue Engineering/methods ; Bone and Bones ; Porosity ; Polyesters/chemistry ; Printing, Three-Dimensional

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 18.

Tytuł:: Three-dimensional printing educational anatomical model of the patellar luxation in dogs.
Autorzy:: Ribeiro Gaspar B; Department of Surgery, School of Veterinary Medicine and Animal Science, University of Sao Paulo, São Paulo, Brazil.
de Assis Neto AC; Department of Surgery, School of Veterinary Medicine and Animal Science, University of Sao Paulo, São Paulo, Brazil.; Pokaż więcej
Źródło:: PloS one [PLoS One] 2021 Jul 30; Vol. 16 (7), pp. e0255288. Date of Electronic Publication: 2021 Jul 30 (Print Publication: 2021).
Typ publikacji:: Journal Article; Research Support, Non-U.S. Gov't
MeSH Terms:: Models, Anatomic*
Printing, Three-Dimensional*
Femur/*anatomy & histology
Knee Joint/*anatomy & histology
Patella/*anatomy & histology
Tibia/*anatomy & histology
Animals ; Dogs

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Skocz do pozycji: 19.

Tytuł:: Additively manufactured patient-specific prosthesis for tumor reconstruction: Design, process, and properties.
Autorzy:: Tilton M; Department of Mechanical Engineering, Pennsylvania State University, University Park, Pennsylvania, United States of America.
Lewis GS; Department of Mechanical Engineering, Pennsylvania State University, University Park, Pennsylvania, United States of America.; Department of Orthopaedics and Rehabilitation, Pennsylvania State University, Hershey, Pennsylvania, United States of America.
Hast MW; Biedermann Lab for Orthopaedic Research, Department of Orthopaedic Surgery, University of Pennsylvania, Philadelphia, Pennsylvania, United States of America.
Fox E; Department of Orthopaedics and Rehabilitation, Pennsylvania State University, Hershey, Pennsylvania, United States of America.
Manogharan G; Department of Mechanical Engineering, Pennsylvania State University, University Park, Pennsylvania, United States of America.; Pokaż więcej
Źródło:: PloS one [PLoS One] 2021 Jul 14; Vol. 16 (7), pp. e0253786. Date of Electronic Publication: 2021 Jul 14 (Print Publication: 2021).
Typ publikacji:: Case Reports; Journal Article; Research Support, Non-U.S. Gov't
MeSH Terms:: Printing, Three-Dimensional*
Prosthesis Design*
Humerus/*surgery
Osteosarcoma/*surgery
Prosthesis Implantation/*instrumentation
Child ; Finite Element Analysis ; Humans ; Humerus/diagnostic imaging ; Humerus/pathology ; Imaging, Three-Dimensional ; Materials Testing ; Osseointegration ; Osteosarcoma/pathology ; Osteotomy/adverse effects ; Porosity ; Surface Properties ; Titanium ; X-Ray Microtomography

Czasopismo naukowe

na półce

Pełny tekst Szczegóły

Skocz do pozycji: 20.

Tytuł:: Optical characterization of 3D printed PLA and ABS filaments for diffuse optics applications.
Autorzy:: Amendola C; Dipartimento di Fisica, Politecnico di Milano, Milan, Italy.
Lacerenza M; Dipartimento di Fisica, Politecnico di Milano, Milan, Italy.
Pirovano I; Dipartimento di Fisica, Politecnico di Milano, Milan, Italy.
Contini D; Dipartimento di Fisica, Politecnico di Milano, Milan, Italy.
Spinelli L; Istituto di Fotonica e Nanotecnologie (IFN), Consiglio Nazionale delle Ricerche, Milan, Italy.
Cubeddu R; Dipartimento di Fisica, Politecnico di Milano, Milan, Italy.; Istituto di Fotonica e Nanotecnologie (IFN), Consiglio Nazionale delle Ricerche, Milan, Italy.
Torricelli A; Dipartimento di Fisica, Politecnico di Milano, Milan, Italy.; Istituto di Fotonica e Nanotecnologie (IFN), Consiglio Nazionale delle Ricerche, Milan, Italy.
Re R; Dipartimento di Fisica, Politecnico di Milano, Milan, Italy.; Istituto di Fotonica e Nanotecnologie (IFN), Consiglio Nazionale delle Ricerche, Milan, Italy.; Pokaż więcej
Źródło:: PloS one [PLoS One] 2021 Jun 16; Vol. 16 (6), pp. e0253181. Date of Electronic Publication: 2021 Jun 16 (Print Publication: 2021).
Typ publikacji:: Journal Article; Research Support, Non-U.S. Gov't
MeSH Terms:: Acrylonitrile*
Butadienes*
Elastomers*
Optical Phenomena*
Polyesters*
Printing, Three-Dimensional*
Styrenes*
Infrared Rays ; Spectroscopy, Near-Infrared ; Ultraviolet Rays

Czasopismo naukowe

na półce

Pełny tekst Pełny tekst Szczegóły

Informacja

Wyszukujesz frazę ""Printing, Three-Dimensional"" wg kryterium: Temat

Źródło danych

Ogranicz do:

Ogranicz do bazy

Typ dokumentu

Temat

Język